How To Make Your Old Hardwood Floors New Again | | Hardwood Giant

How To Make Your Old Hardwood Floors New Again

Having your favorite hardwood floors installed in your house is very simple. Making a purchase as well as fitting it quite easily is all that you need to make your dream come true concerning hardwood flooring. The problem comes in when you realize that your floor has lost its original beauty. Now repairing your old hardwood made floors becomes one of your responsibility and hence it requires your attention as well to have it correctly restored.

If your hardwood made floor is very scuffed up, the boards are squeaky or warped, or it soaks up water instead of repelling it, you probably need to consider refinishing your floor. However, as the refinishing process gets rid of the top layer of the wood, you need a relatively thick floor for refinishing to be an option.

Besides, the last thing you don’t want is to expose the sub-floor under your hardwood accidentally. In case you’re not sure about the thickness of your flooring, and whether it needs to be refinished, you should consult a flooring professional and get some help.You can restore the initial appearance of your hardwood floor to make it look new using the following tips.

Buffing and Sanding

After getting all your furniture and fixtures out of the room as well as cleaning the floor, the first step refinishing process is sanding away the old stain and finish. In addition to revealing the wood, sanding helps to level the floor and also helps to expose the grain of the planks.

Buffing and sanding can significantly contribute to remove scratches, cracks, and scuffs, and improve the appearance of the hardwood. Either you or probably your flooring professional should sand multiple times while vacuuming between each pass as well as using smaller-grit sandpaper each time. Upon completing the buffing and sanding task, you should have a level to smooth the wood surface.
Hardwood Flooring Milton, Hardwood Flooring Oakville, Hardwood Flooring Orangeville, Hardwood Flooring Richmond Hill, Hardwood Flooring Barrie

Staining

If you prefer to add stain to your wood flooring, now, this is the time. You should first test the dye in a small, unobtrusive region to ensure that the resulting color is your best choice. Then, it is advisable that you should follow the manufacturer’s instructions and directions to ensure that you apply the stain in the right manner. In case you’re working with a flooring contractor, you’ll only need to approve the stain color.

Finishing

Once the stain is completely dried, the thing is to apply a polyurethane sealant which protects the floor, for example, wax. The sealant waterproofs your hardwood as well as giving it the traditional glow and shine that the hardwood flooring is famous for.

Although waxing tends to give that polished appearance, the look is not sustained for a long duration. With time, there will be the need to go for sanding in future. In that case, the restored floor through waxing might prove to be a hindrance. The best way is to maintain your hardwood floors regularly. Therefore, that restoration after some few years will not be a cumbersome process.

Once you’re pretty sure that the sealant has thoroughly dried, you can start getting in your furniture as well as other furnishings back into your room. After which, you will enjoy your refinished floor for many years, depending on how to maintain your floor. A professional flooring service provider can advise you on whether you can continue with deep cleaning or another coat of sealant, or if your hardwood flooring truly needs refinishing.

Hardwood Flooring Brampton, Hardwood Flooring Toronto, Hardwood Flooring Mississauga, Hardwood Flooring Burlington, Hardwood Flooring Markham